CON5103A is guaranteed the basis of performance, which simplifies the function with a special strong price advantage. Clear display, simple operation and excellent test properties make it has high costperformance. Can be widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmacy, biochemical, food and water and other solution conductivity value of continuous monitoring.
Showing the way: LCD (LCD) display, bringing backlighting, in dark conditions clearly visible
Measuring scope: electrode constant x (1 ~ 2000) muon S/cm, 0 ~ 99.9 ℃
0.01 ~ 20 mu S/cm (with 0.01 electrode); 0.1 ~ 200 mu S/cm (with 0.1 electrode); 1.0 ~ 2000 muon S/cm (with 1.0 electrode);
10 ~ 20,000 mu S/cm (with 10.0 electrode);
Note: wide range: electrode constant x (10 to 20,000) muon S/cm (order specified).
Resolution: 0.001 muon S/cm, 0.1 ℃
Conductivity, resistivity and temperature can switch display.
Electrode constant: 0.001 ~ between cm - 1 cheiloschisis or palatoschisis by software Settings
Used scope: the auto/hand-switch 0 ~ 99.9 ℃, 25 ℃ convert
Fine degrees: + 1.0% FS, + 0.3 ℃
Current isolation output: 4 ~ 20 mA (load < 750 Ω).
Alarm relay: AC220V, aaa, alarm signal isolating output
Communication interface: isolation RS485 (optional)
Electricity source: AC220V + 22V 50Hz, optional DC24V plus or minus 1Hz plus or minus 240 V
Protective level: IP65
Working conditions: environmental temperature 0 ~ 60 ℃, relative humidity 90 acuities ℅
> power lost save: for 10 years
Weight, size: 0.8 kg, 96 x 96 x 110 mm
The size of holes: 92x92mm;
Second table installation: opening type
Electrode installation: circulation type/sink into type/flange/pipeline
Standard configuration: CON5103A second table one, DDJ - 0.01 electrode one
Microcomputer: using high-performance the CPU chip, high-precision AD transform technology and SMT placement technology perform multiple parameters measurement, temperature compensation, range automatic conversion, high precision and repeatability.
High reliability: touch buttons, no switch knob and potentiometer.
Automatically converts measure frequency: avoid electrode polarization, improve measurement accuracy.
Phase-sensitive detection design: the elimination of the influence of wire measured.
25 ℃ convert: temperature compensation of automatic measurement/manual input.
Alarm functions: alarm signal isolating output, alarm upper and lower limit can be arbitrary set, alarm lag withdrawn.
Industrial control type watchdog: ensure instrument won't crash.
Network function: the isolation of current output and RS485 communication interface.
Isolation current output: current the output of the corresponding conductivity value upper and lower limit can be arbitrary setting.
Adopt circulation type, sank into the type, flange or installation of pipes.
1, must inform by the constant power extremely.
2 the length of the cables and electrode, according to match that was.
3 and electrode installation way.
4, power supplies, not to also signify AC220V match by.
Five, if need to display resistivity order type: CON5103A regular online resistivity apparatus, measurement range: 0 ~ 20.00 M Ω cm
6, CON5104 has discontinued, instead of model for CON5103A.